COVE BASE & EPOXY FLOORING


When doing an epoxy flooring job where you need a 100% water tight floor or you need a 100% sanitary finish between the wall and the floor, cove base is your answer. As you can see from the picture cove base is curved at the top and bottom so that it finishes flush with the wall and floor. This is important for commercial kitchens and food production areas that cannot have a seam or ledge for bacteria to sit on and grow. It’s also great for wash down areas since it protects the walls from water splatter and makes it easier to wash down the floor.
A lot of times even in residential applications you have a garage or other such room over a finished room below. In the case of a garage application you can get snow melt and rain run off that will work its way through the concrete and into the finished space below. Remember concrete is porous so water can and will penetrate all the way through. With a good floor epoxy and some cove base you can turn your garage floor or any floor for that matter into a waterproof tub. Simply install the cove base around the entire perimeter of your space and then run any of our epoxy systems across the floor and up the cove base. You now have a monolithic water tight coating over the floor and up your wall.

Cove base is available in different heights to accommodate any application requirements. It’s easy to install and can be fitted around corners also. We like www.easycove.com. They make a good product that is epoxy paint ready. Or you can make your own cove base out of mortar and a cove base tool. However this very often doesn’t turn out as nice as the easy cove and is very time consuming. Either way you do it, cove base is a great way to finish you epoxy flooring project both from a finished look aspect and for the waterproofing and sanitary benefits.

Facebooktwittergoogle_plusredditpinterestlinkedinmail